English
中文
Zijing Mining Group Co Ltd
07 Sep 2021
The heat exchanger's plate isolates the medium and exchanges heat, which is an essential part of the plate heat exchanger. The mainstream materials are Stainless Steel, Titanium and Titanium Palladium, Hastelloy, and other alloys. Each plate contains two parts:
Metal plate: metal plate is an essential heat transfer element, with pressing corrugated, sealing groove, and corner hole. The ripple of the plate can strengthen the heat transfer effect and increase the rigidity of the thin plate, which improves the bearing capacity of the plate heat exchanger. And because the liquid is turbulent, the corrugation can reduce the formation of sediment or dirt. In addition, it has a particular self-cleaning effect.
Gasket: It clipped on the washer groove, preventing the fluid from leaking out.
Four characteristics of plate heat exchanger design
1. Design of diversion area
The fluid flows evenly across all plate corners to minimize pressure loss in the diversion area, even with the widest plate. All the physical space of the plate is transformed into an effective heat exchange area. It can make full use of the allowed pressure drop to improve the flow rate of the convective heat exchange part and improve the overall heat exchange efficiency.
2. Single-side flow design
A plate heat exchanger only uses the same type of plates, which makes the heat exchanger easier to pipe, install and maintain, and reduce the type and quantity of spare parts.
3. Two plates design- H and L types
Different combinations of plates can maximally improve the heat transfer coefficient and reduce the equipment cost.
4. One press molding process
The plate's corrugation depth is the same to ensure that each contact point is well connected. As a result, there is no excessive pressing area on the scale, and it will not produce hidden cracks. In addition, the metal grain height on the plate is the same, and the thinnest plate can be up to 0.4mm. As a result, the mechanical properties are better.
The quality of the plate heat exchanger is essential. Accessen can provide the on-demand and the most suitable heat exchanger products for you!
Shanghai Accessen Co., Ltd. professionally specializes in heat exchangers R&D, manufacturing, sales, and service. We founded in 2002. Accessen’s three manufacturing bases are located in Shanghai and Jiangsu, China. Over 100,000 square meters in total, producing up to 30000 heat exchangers and 5000 heat exchanger skids annually. The core of Accessen´s operations is based upon one key technology: customized products. We are also complying with the American Society of Mechanical Engineers, CE-Pressure Equipment Directive, American Petroleum Institute, Japanese Industrial Standards, International Electro technical Commission, Bureau Veritas, American Bureau of Shipping, Det Norske Veritas, China Classification Society, and other.
Flexible on demands
ACCESSEN is a heat exchange solution provider specializing in the research, development, manufacture, sales, and service of heat exchange equipment. With an annual capacity of over 30,000 sets, is one of the largest heat exchanger manufacturers. Specialize in the HVAC, Refrigeration, Power, Metallurgy, Chemical, Food, Electronics, Marine and Environmental protection markets, your on-demand heat transfer solutions provider.
